Application Guide
For Smart Fieldmeter¨, Smart
Fieldmeter¨ Digital
And Omnifield Antenna¨
|
|
Smart
Fieldmeter¨ Digital |
Smart
Fieldmeter¨ |
Omnifield
Antenna¨ |
|
Look |
|
|
|
|
Description |
Isotropic 3-axis probe with meter measuring the RF field
strength. |
Isotropic 3-axis probe with meter measuring the RF field
strength. |
Isotropic 3-axis antenna, producing
the RF signal proportional to the RF field strength. |
|
Applications |
- EMC testing for CE, MIL and industrial EMC qualification. - RF field strength
monitoring for health, safety and industrial or military environmental
control. - RF compliance
testing of active transmitters: TV, Cell, Radio and other industrial sources. - RF monitoring of
MW ovens and other industrial power RF applications. - Scientific and
medical research of biological effects of electromagnetic radiation and
electrosmog. |
- EMC testing for CE, MIL and industrial EMC qualification. - RF field strength
monitoring for health, safety and industrial or military environmental
control. - RF compliance
testing of active transmitters: TV, Cell, Radio and other industrial sources. - RF monitoring of
MW ovens and other industrial power RF applications. - Scientific and
medical research of biological effects of electromagnetic radiation and electrosmog.
|
- Selective
measurement of RF signals when spectral analysis of the field is important. - RF field strength monitoring for health, RF safety and
industrial or military environmental control. - Scientific and
medical research of biological effects of electromagnetic radiation and
electrosmog. |
|
Benefits |
The versatile EMC test lab in your hand. Meter supports up to four different probes and stores the results
on the removable memory card.
Have auto ranging, auto zeroing, and alarm and performs time and
spatial averaging. Fully
adjustable data logging with time and GPS position stamp. Bidirectional link
to a PC with wired optically decoupled or fiber optic connection. Flexible and upgradeable
architecture. |
Simple professional field strength meter for field and lab
use. Measures the RF field strength with one dedicated probe. Uses decoupled wired or fiber optic
link to a PC. Peak, Pulse and Average modes. Semiautomatic auto zeroing.
Classic time proven design. |
The unique isotropic small size RF antenna operating with
any spectrum analyzer of your choice. Output RF signal is proportional to the RF field amplitude. Measure the field strength and the
frequency of the RF transmitters. |
|
Frequency Response |
Specified by the probe type: 0.2 MHz-3 GHz (Kit 1D), 2 MHz-12.5
GHz (Kit 2D), 3 MHz-18 GHz (Kit 3D).
900-1900 MHz (Kit 4D). Deviations are specified by frequency
correction factors. |
Specified by the probe type: 0.2 MHz-3 GHz (Kit 1), 2 MHz-12.5
GHz (Kit 2), 3 MHz-18 GHz (Kit 3).
900-1900 MHz (Kit 4). Deviations are specified by frequency correction
factors. |
Specified by the antenna factors in the frequency range 30 MHz-3 GHz (OFA-S). |
|
Field Range |
0.2 V/m-800 V/m |
0.2 V/m-800 V/m |
3 mV/m-300 V/m. |
|
Additional Equipment |
Not required for normal operation. Field Gauge¨ is included. ODLK
PC link kit, FOLK fiber optic link kit and GPS-R receivers are provided as an
option. |
Not required for normal operation. Field Gauge¨ is included. PCLK
PC link kit, FOLK fiber optic link kit and data loggers for data storage are
provided as an option. |
Any standard spectrum analyzer. Portable one is the best choice for field applications. |
|
Calibration |
United Kingdom NPL traceable |
United Kingdom NPL traceable |
United Kingdom NPL traceable |
|
Warranty |
1 Year, parts and labor. |
1 Year, parts and labor. |
1 Year, parts and labor. |
|
Made by |
EMC Test Design, LLC USA |
EMC Test Design, LLC USA |
EMC Test Design, LLC, USA |
